Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain, durable and long-lasting. They are not susceptible to rot or rust like timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will help prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, which can make it very dangerous and potentially fatal. It is crucial to take the time to ensure that you are doing everything you can to ensure that your windows are in good condition.

For single pane windows it can be relatively simple to replace them, and the replacement will usually fit inside the old frame very easily. However when you have double-pane windows that are held in place by internal beading, it'll be more difficult to get rid of the old panes and put in new ones. In this situation, you will need to locate some plastic spacers that will aid the new pane in being able to fit properly into the frame of the window.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass yourself. It is also recommended to lay down a drop cloth prior to when you start working on the glass, so that any shards fall on the fabric instead of landing on the floor where they can be trodden under and cause further damage.

After the glass has been removed, it's a good idea to seal the gap with packaging tape or duct tape to block drafts and water from entering the home until a professional comes out and fix the window. It also acts as an obstacle to stop intruders from making their way into your home. If the gap is particularly large, you might think about a security door that has an integrated window as it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber sash windows. Over time, they can develop a variety of issues, including sliding. A window that isn't properly aligned can cause problems with light, draughts, and even security. It's important to take action when you realize that your uPVC windows are falling down.

To repair a window that is sagging, you can try to reposition the hinges. To do this, you'll need open the window so that you can access the frame. After that, using the screwdriver, you'll be able to unscrew the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after having repositioned your hinges. If you're happy with the fit, tighten the screws to ensure that they remain in the right place.

If you cannot reposition the hinges, you could have to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes their tightness to decrease. If this happens, it's crucial to replace the seal as quickly as you can to ensure that your uPVC windows remain watertight and secure from draughts.

uPVC handles may also loosen up. This is often caused by screws that have become undone over time, but it can be caused by the handle mechanism wears out. It's relatively easy to fix a loose uPVC handle. The first step is to close your window and do a test to ensure that it fits. The joint at the corner of the sash should align with the joint on the casing. If it doesn't, you can use a screwdriver to loosen the handle and then turn the mechanism back into its original position.

3. Water Leaks

It is crucial to act if you awake each day to find a smoky wall and wet floors. Water leaks from windows can not only cause degrading of the structure of your home but also undermine your efforts to regulate the temperature within your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame has been damaged or missing.

This is a fairly simple fix that can be done by any skilled DIYer. Based upvc windows repairs on the severity of the issue the caulking used previously may require removal before a new layer is applied. When it comes to uPVC repair, you should avoid 'over-caulking'. This can make your window more difficult to clean and reduce its energy efficiency.

It is important to check that the drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more extreme instances, you may need to replace the window.

Other indicators of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. The is a fungus that thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to remember that if the leak is coming from between the glass of your double-glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open or if it blows open with an ease. They can be easily replaced by any competent DIYer and can usually be completed in just a few minutes.

Like any mechanical part hinges will wear out over time. The process of replacing a hinge on a window is essentially a very simple process, but it's simpler if you have someone to help hold the frame up.

Check that the uPVC hinges are closed and open in the right direction. You can do this by checking here for the arrows on each hinge, this shows check here which way the window should open.

The issue could be caused either by opening the window improperly or due to a poor installation in the factory. Sending us a photo via our website will often resolve the problem. We are happy to provide assistance.

Regularly lubricating the hinges is essential. Applying an engineering lubricant that is light to the hinges is a good method of doing this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window open and close more easily. It can also lower the possibility of a window sticking and prevent corrosion. Ideally, you should do this at read more least once a year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a few various factors. The hinges can also be disaligned as a result of wear, causing an opening where the sash meets frame. They can be fixed by giving them a good cleaning, but in the event that they are beyond repair it may be necessary to get them aligned or replaced. Second, the interlock can be disaligned. This happens on the hinge side and could require to be cleaned. In certain instances it is possible to replace these.

These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. Installing high-quality weatherstripping can help prevent draughts. Another alternative is to replace the window with low-emissivity glass. which will help regulate indoor temperatures and will lessen the risk of draughts.

Lastly, one of the most effective methods to reduce drafts is to use a draught excluder, these are typically fabric tubes that are filled with some kind of filler. They can be placed on top of your windowsill. They will help block out cold double glazed window repairs near me air and keep your home warm and cosy!

Your upvc windows can remain a great source of insulation and security in your home with a little regular maintenance and repairs. However, it is important to realize that all windows have a lifespan and they may reach a point where it is more efficient to replace them than fix them. If you encounter any issues with your window made of upvc it is recommended to speak with a professional as soon as possible.